CertExams.com, revised Juniper NetSim to include several labs in the area of NAT, IPv6, and Access Control Lists (ACLs). The new labs include the following:
IPV6 Labs
Configuring IPv6 address on a interface in EUI-format (http://routersimulator.certexams.com/juniper-sim/labs/conf-ipv6-eui-format.html)
Configuring IPv6 address on a interface in general form (http://routersimulator.certexams.com/juniper-sim/labs/conf-ipv6-general-form.html)
Ipv6 show commands (http://routersimulator.certexams.com/juniper-sim/labs/ipv6-show-command.html)
Configuring IPV6 static routes (http://routersimulator.certexams.com/juniper-sim/labs/conf-ipv6-static-route.html)
Ping Test using IPV6
Traceroute on IPV6 (http://routersimulator.certexams.com/juniper-sim/labs/ipv6-ping-test.html)
Firewall Filter (ACL) Labs
Creating a Firewall filter (http://routersimulator.certexams.com/juniper-sim/labs/create-firewall-filter.html)
Applying firewall filter to an interface (http://routersimulator.certexams.com/juniper-sim/labs/apply-firewall-filter.html)
View Firewall filter entries (http://routersimulator.certexams.com/juniper-sim/labs/view-firewall-filter-entries.html)
Configuring and Verifying firewall filter Lab Scenario-1 (http://routersimulator.certexams.com/juniper-sim/labs/conf-verify-firewall-filter-1.html)
Configuring and Verifying firewall filter Lab Scenario-2 (http://routersimulator.certexams.com/juniper-sim/labs/conf-verify-firewall-filter-2.html)
Network Address Translation Labs
Configuring Source NAT using Egress interface Address (http://routersimulator.certexams.com/juniper-sim/labs/NAT-Egress-interface-address.html)
Configuring Source NAT Translation pool (http://routersimulator.certexams.com/juniper-sim/labs/NAT-translation-pool.html)
Configuring Destination NAT pools (http://routersimulator.certexams.com/juniper-sim/labs/conf-destination-NAT.html)
Creating Destination NAT rule set (http://routersimulator.certexams.com/juniper-sim/labs/Destination-NAT-rule-set.html)
Configuring Static NAT for single address translation (http://routersimulator.certexams.com/juniper-sim/labs/Static-NAT-single-add-translation.html)
Configuring Source NAT using multiple rules Lab Scenario-1 (http://routersimulator.certexams.com/juniper-sim/labs/Static-NAT-multiple-rules-scenario-1.html)
Configuring Source NAT using multiple rules Lab Scenario-2 (http://routersimulator.certexams.com/juniper-sim/labs/Static-NAT-multiple-rules-scenario-2.html)
Configuring Destination NAT using multiple rules (http://routersimulator.certexams.com/juniper-sim/labs/Destination-NAT-multiple-rules.html)
Check out the new labs at Juniper Labs (http://routersimulator.certexams.com/juniper-sim/labs/index.html) page.
Download the free trial version of the product here:
http://routersimulator.certexams.com/juniper-sim/download-juniper-network-simulator.html