Author Topic: CCNA Lab Kit  (Read 816 times)

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: Juniper and Cisco Router and Switch Manuals
« Reply #15 on: September 30, 2019, 04:16:37 AM »
Check this link for Juniper manuals for SRX, and others:
https://www.juniper.net/documentation/product/en_US/srx100

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: SFP ports n adapters for 3750
« Reply #16 on: October 03, 2019, 09:54:30 AM »

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re:3750G-TS-S vs E
« Reply #17 on: October 08, 2019, 07:47:28 AM »
 Re: 3750G-TS-S vs 3750G-TS-E


3750G-TS-S is a switch with standard image which supports basic Layer3 features like RIP 1/2 and static routing only.

3750G-TS-E is a switch with enhanced image which supports ehanced layer 3 routing features like EIGRP,OSPF, BGP, IS-IS, Policy based routing.

Please see the differnce below:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_qanda_item09186a00801b0971.shtml


What is the difference between 3750g and 3750

As per your question,G means all ports are Gigabitport.

e: Cisco 3750-X vs Cisco 3750G

Differences between 3750G and 3750X:

The 3750G uses stackwise and 3750X uses stackwise+. With Stackwise, EVERY packet has to go across the stack ring even if the destination port is on the local switch. With Stackwise+, the switches can do local switching.

Also, if you mix STackwise and Stackwise+ capable switches in the same stack, the Stackwise+ switches will still be able to switch locally and the Stackwise switches must continue to operate the same way.

Here's a link:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5023/prod_white_paper09186a00801b096a.html


Cisco 3750 vs 3560


What is the difference between the Cisco 3750 and 3560?  What about the 3750E vs 3750X?  These question comes from clients time and time again.  Here are the answers you need.

The main difference is that the 3750 supports Cisco StackWise, i.e. creating one large virtual switch out of multiple chassis.  The 3560 has a “cluster” feature which while it sounds close, just means that you can control multiple switches from a single one.
« Last Edit: October 08, 2019, 07:55:30 AM by certforumz »

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: Cisco serial cables smart serial 26 pin cable
« Reply #19 on: October 09, 2019, 07:12:18 AM »
Check this out: USD 5 per cable 2626X

https://www.aliexpress.com/item/32221983252.html

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: Smart Plug WiFi
« Reply #20 on: October 11, 2019, 02:20:38 AM »
How IoT devices are connected to the Internet, check this out:
http://cactus.io/tutorials/web/connect-iot-device-to-the-internet

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: TPLink configuration for Port forwarding
« Reply #21 on: October 13, 2019, 05:38:47 AM »
Check this out here
https://www.tp-link.com/us/support/faq/72/

To see if port is blocked:
https://www.portchecktool.com/
"Timed out" means that the ISP is blocking the port.

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
« Last Edit: October 13, 2019, 10:25:57 AM by certforumz »

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re:eCommerce stats
« Reply #23 on: October 14, 2019, 08:21:58 AM »


Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: How to check ping with different source IP in Wincows DOS?
« Reply #26 on: Today at 01:25:53 AM »
check this out:
https://serverfault.com/questions/273600/ping-from-specific-network-adapter-on-windows

syntax:
From Windows 7 (Version 6.1 Build 7601: Service Pack 1) ping /?

Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
        [-r count] [-s count] [[-j host-list] | [-k host-list]]
        [-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name


Options:
-t             Ping the specified host until stopped.
               To see statistics and continue - type Control-Break;
               To stop - type Control-C.
-a             Resolve addresses to hostnames.
-n count       Number of echo requests to send.
-l size        Send buffer size.
-f             Set Don't Fragment flag in packet (IPv4-only).
-i TTL         Time To Live.
-v TOS         Type Of Service (IPv4-only. This setting has been deprecated
               and has no effect on the type of service field in the IP Header).
-r count       Record route for count hops (IPv4-only).
-s count       Timestamp for count hops (IPv4-only).
-j host-list   Loose source route along host-list (IPv4-only).
-k host-list   Strict source route along host-list (IPv4-only).
-w timeout     Timeout in milliseconds to wait for each reply.
-R             Use routing header to test reverse route also (IPv6-only).
-S srcaddr     Source address to use.
-4             Force using IPv4.
-6             Force using IPv6.

Example:
dos> ping 192.168.100.1 -S 192.168.200.1

use CAPITAL S to specify source address from which ping will originate. in the above example, two network cards are placed in the windows computer. normal ping originates from 127.0.0.1 (local host IP). In the example the ping originate from 192.168.200.1

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: Wandell Odoms blog iOS versions
« Reply #27 on: Today at 05:06:39 AM »
Check out wandell odoms blog here:
https://blog.certskills.com/labgear03/

Cisco iOS versions explained:
http://www.ciscopress.com/articles/article.asp?p=2106547

Offline certforumz

  • Cert Exams
  • Administrator
  • Hero Member
  • *****
  • Posts: 914
  • Ask me a question ...
    • CertExams - CCNA, A+, Network+, and Others
Re: Cisco Labs Discussion
« Reply #28 on: Today at 05:32:12 AM »